Discussion Locked

printer problems

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i have a hp692c deskjet printer i'm trying to repair. it was recently serviced and working when carried to customer it stopped working. Here are the problems
1. not doing a test print
2. when cover raised cartrigde comes out when cover is put back down the cartridge doesn't go back in
3. doesn't print at all now
now the only thing that happened between the service and delivery to customer is that it was transported to customer
what could be wrong?

10 replies

by wanabedrsean

This sounds like a carriage error.What are the lights doing when this happens,are they flashing back and fourth?

by wanabedrsean

if you are having a carriage error this indicates either the carriage is obstructed or the cartrige\ cartriges went bad

by ann777

sounds as if the printer was banged up a bit in transport (or the customer took things apart and did not place the cover or other parts back on properly).

The cover should close properly -- with the cartridge inside. It sounds as if the cover is not properly aligned for whatever reason.

by ann777

I recommend that you take it all apart and put it back together again; making sure that everything meshes up properly. The paper feed may not be working because of misalignment. You should also look at the pickup rollers and clean them (or replace them if they are worn).

by jdwjr

take out carteidges and reinstall as new this should reset and fix problem
jd

This discussion is closed to new replies.