Discussion Locked

Pro Audio 3D Sound Card for 386 to 486's

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have an older sound card that was compatible with the 386 and 486 family.

This sound card is: Pro Audio 3D sound card.

Is this sound card a SOUND BLASTER SOUNDCARD?

This Sound card also has a built in connector to connect the slower SCSI CD-ROM drives, my problem is I cant find any drivers anywhere mainly because I dont think this Sound Card is made anymore.

Any suggestions?

Thanks...

7 replies

by thechas

Take a look at the IC's on the sound card.
The larger one's are the controller chips.
Hopefully, they are from a "major" sound chip mfg.
(ESS, Opti, etc)
If you can identify the chips, then go to the chip mfg web site, and see if they offer "reference" drivers for your chipset.

If your lucky, this will at least get you sound.

by csmith

We have customers that still have these cards.
The card is reliable.
Some of them are in Win98 PCs.
When the PC OS is upgraded from Win3.1 to Win98 the old Win 3.1 driver still works.
The driver load in CONFIG.SYS and AUTOEXEC.BAT remain, and Windows uses the 16 bit DOS access method.
ISA is 16 bit, so I don't think a 32 bit driver would provide much of an advantage, besides eliminating the mode switch time in the CPU/OS.
Regards, Chris

This discussion is closed to new replies.