Discussion Locked

program performed an illegal operation

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have an HP scanner model (21ooc). Each time i try to scan a document,midway into the scan it stops, showing me half of the image. It shows the message "This program has performed an illegal operation and will be shut down". I have tried reinstalling the driver but the problem persists. Please i need someone to help me out. (The scanner is a USB device)

1 reply

by thechas

These are the first hints that come to mind;

How high a resolution are you attempting to scan at? The higher the resolution, the more memory and hard drive space you need to scan in the image.

How much memory do you have, and how much free space is there on your hard drive?

What OS are you running? Windows 95 does not have full USB support.

Did you have a different scanner prior to this one? There may be remnants of the driver or software getting in the way.

Does your system have any conflicts ("?" "!") showing in device manager?

Do you have other USB devices? and do they function?

Do you have a lot of "background" programs running? (Icons in the system tray) These use up memory, and can interfere with demanding activities susch as scanning.

If you are running W98 or later, and have more than 128MB of ram, and at least 2GB free on your hard drive, the scanner should run.
The first thing I would try is to update the drivers for your system/motherboard/chipset.
There are also several USB patches for some versions of windows and some motherboards.
If you have not performed a Windows update, that may correct the problem.

This discussion is closed to new replies.