Discussion Locked

proprietary hardware

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a compaq presario with a bad floppy drive. The warranty is no longer valid, and I refuse to send the cpu back for such a simple repair. However, no one, not even compaq, has been able to supply me with the necessary drive. A regular floppydrive will not fit. Where can I look for this replacement?

7 replies

by gateway_tech

I am not sure which compaq you have but you may be able to get a standard replacement floppy drive to work by simply taking off the face plate. The faceplate of the floppy drive is non essential.

by tbradley

There are some sources for floppy drives, but you have to do some searching.

pcrepairpart.com and daktech.com have a large variety of vintage compaq parts. Other sources can cross-reference the drive model for you. You'll have to get to the drive, and look for

- Compaq part number
- Compaq spare part number
also look for a manufacturers name and part number.

Compaq like to use Alps floppy drives, and if you can get a part number, a source other than compaq could deliver a drive.
Then, as a last resort, you could always get a new one, and remove the face plate, but compaq throws in yet another wrinkle, the eject button. You'll have to find a drive that will accept the eject button from the original, or it will never fit back into the case properly. Compaq loved to use the oval shape, where most manufacturers used a square button.

Alas... I never did like Big Blue and the Red Q ( IBM and Compaq ) for this very reason.

by shmaltz

answer 2 at the end makes the point NEVER USE BIG BLUE or RED Q.
Ask any1 thats doing computers they will tell you the same: for PCs DONT GO NEAR A BIG BLUE or BIG Q.

This discussion is closed to new replies.