Discussion Locked

Putting an internal tape drive in a rack

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a server that I am replacing with a rackmount server that has no room for the internal tape drive the old server has. I still want to use the tape drive. Is there some hardware out there that I can hold internal drive devices like a scsi cdrom or scsi tape drive with scsi ports out the back that can be rackmounted?

3 replies

by ebob

There are a number of cages you can get for SCSI devices which take "standard" 5.25" devivces like HDD and Tapes Drives, meant to be connected to a "external controller". They are not specifically rack-mountable, but could just as easily sit around on top of your server. Just leave a couple of "units" of height.

As for "real" rack mounting, you should check out the catalogue for your specific rack, or one of the "generic" after market types like www.calpc.com or http://www.gtweb.net/rackacc.html.

This discussion is closed to new replies.