The same stuff is available to Australia as the rest of the world!!! Most computer hardware is produced in the Far East, which means it's right on your doorstep!! Read reviews in computer magazines, pay yer money and take yer choice!!
The best (and only) power supply to suit an Athlon 1.8GHz is an ATX type with a rating of at least 400 Watts. Cooling fan....the best socket A model you can afford!!
The difference between a 300w and 500w power supply is 200w. Power is a combination of voltage and current. All computer power supplies produce 5v, 12v, -12v, -5v and ATX supplies also have 3.3v outputs. What defines the power rating is the amount of current that each of these outputs is capable of supplying. Most of the logic in a computer uses the 3.3v and 5v supplies. The 12v supply powers drive motors, fans and so on. The -ve voltages are very low current as they are really only for supplying a negative rail to certain older memory chips and analogue devices that require balanced supplies such as soundcards and serial interfaces etc.
A typical 250w supply has 5V at 25A, 3.3v at 14A, 12V at 10A, -12v at 0.8A and -5v at 0.5A
The 5v rail is rated at 125w (25 x5)
The 3.3v = 46.2w
The 12v = 120w
-12v = 9.6w
-5v = 2.5w
Add these together gives you a total of just over 303 watts which is obviously more than the total rating of the PSU...You will NEVER be able to draw maximum current from every supply so 250 W is the average rating. If you have a case fan, a graphics board with a fan fitted, a good CPU fan, two or more hard disks, a CD/DVD and a CD Burner, plus an assortment of PCI cards etc AND you run an Athlon....it is possible that you MAY exceed the current available on the 12v supply with a lower wattagePSU...if you need to draw 12A from the 12v supply, then a 300W psu is needed instead of a 250, even if you are not drawing max current on the other voltages.