Discussion Locked

Raid 0+1

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Can someone please explain what Raid 0+1 is, and the physical configuration of the disks?

7 replies

by thmiuatga

Hey;
I can't tell you what raid 0+1 is but I can tell you what raid 0 & 1 is if it will help.
Raid 0 is more to performance that data reliability because the data is spread across the amount of drives connected be it
2,4, or more. Even blocks of data are sent to one and odd blocks to the other so the data is split and if a drive fails you've got problems.
Raid 1 streses data reliability because data is written to two or more drives identically instead of being split so if one drive fails the data is still intact and can be read.
My scientific wise-ass guess (SWAG) on configuration is that the raid 0 setup has the drives connected in series and the raid 1 drives in parallel. This could be a two master two slave or master/slave config. if this is true then maybe the raid 0+1 is a slave/slave/master supposing that the raid 0 is two slave drives and the raid 1 is a master. I'm not sure but hopefully what I have told you has given some insight on what answers you seek.

Good Luck

by roberwel

Raid 0+1 (also known as Raid 10) is a mirrored stripe. In the minimum config it would consist of four drives. Drives 1 and 2 would be striped (Raid 0) as one set. Drives 3 and 4 would also be striped as a second set. The two sets would then mirror each other (Raid 1). Any data that is written to set one would also be written to set number two (kinda like a backup). If the one of the sets fail the data is still in tact.

This discussion is closed to new replies.