Discussion Locked

RAID 5 Hot Swap Drives

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have an array of 8 drives controlled by a Raidion controller. Drives are configured as RAID 5 with one Hot Swap. This is used as a single volume under NetWare 5.1. I am adding another array of 10 drives. They will be RAID 5 also and the volume will be expanded to include these in the single volume. My question is this: Since I already have a Hot Swap drive in the volume, is there any need to create another Hot Swap when I intitialize the second array? Or is the Hot Swap drive assigned only tothe first set of drives and I should create a Hot Swap for the second set?

3 replies

by isys

You need a second hot-swap. Your raid arrays are configured as individual logical drives even though NetWare will see them as one volume. Your RAID configuration utility will graphically demonstrate this.

by labrat

I understand this better. We contacted Raidion (maybe should have done that before posting my question) and their controller can assign the hot-swap drive to multiple LUNs. Their tech said most controllers wouldn't do that so your answer iscorrect. Since all drives will share information thru the single volume, they suggested one hot-swap configured as a "global" standby. This will give us a usable drive that would otherwise be a redundant hot-swap. Thank you for your help.

This discussion is closed to new replies.