4 replies
by pierrejamme
More info on server would be helpful. OS, SPs, server model, controller type, etc.
Generally you would use the external to connect to sometng like a Dell Powervault.
by lcw
yes,It is true,for Dell Powervault.
Some raid card do have external and internal,how to really use it.
by rcom
The external channel is for connecting other devices like tape drives etc to the controller.
There is usually a connector on the controller that can have a cable attached or a cable with a slot connector that is installed in one of the slots. This allows for an external device to be attached.
The settings can be accessed from the firmware or diagnostic software included with the controller.
by xsive
one thing to be careful of here is that some cards (such as the adaptec 39160 that ships with dell Servers) have 2 external ports as well as 2 internal ports, but since the card is only dual channel you can only have one internal and one external conector, otherwise you get conflicts with your internal and external devices.
Make sure you know which ports are channel 0 and which are channel 1 before you plug anything in!
cheers,
Xs
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending