Discussion Locked

Raid for Video Editing

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I do some video editing and am building a new computer. Is it necessary to build a Raid system?
Or will the basic IDE set up be sufficient?
Thank you!

5 replies

by saihib

Why don't you use a Promise Fast Trak IDE Raid card. You'll enjoy almost the speed of SCSI for a lot less money.

by bob sellman

I've just done what you are trying to do. IDE works well without RAID.

You need to be sure to purchase 7200 RPM drives, not 5400 RPM. I also highly recommend purchasing two hard drives. Drive C (or the one with Windows XP or 2000 on it) shouldcontain, in addition to the operating system (and do not accept anything other than XP or 2000 due to the large file sizes you will need [in excess of 4 gig]), drive C should contain your applications. I would get an 80 gig drive for drive C.

Drive D should only be used for the source and editing files for each video project. This keeps things cleaner and will run better. You can, however, use drive C as the destination when creating an edited AVI file from the source files.

I would suggest purchasing as large a 7200 RPM drive D as you can afford, with a minimum of 80 gig.

This is the setup I have (with Windows XP and lots of fast RAM, NOT the PC133 RAM), using Video Deluxe from Magix (www.magix.com), and it has been reliable and successful.

I'd also suggest using the Soundblaster Audigy sound card, since it includes a Firewire port (at no additional charge). The Audigy card without the front panel add on (the "Platinum" version) is available for under $80.

By the way, if you are using RAID realize that you will use RAID 0, which provides, if anything, less reliability that a single drive. RAID 0 is designed to increase the data transfer speed by spreading a data file among more than one drive. It used to be necessary, but the speed of today's ATA100 7200 RPM drives makes it unnecessary.

This discussion is closed to new replies.