Discussion Locked

RAID problem

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
How can I recover a hard drive that is seen by the Raid bios, but not windows ?

9 replies

by bchesmer

Please comment back with more info:

1. RAID level
2. RAID controler MFG & Model
3. What windows version (Is it a server version?)
4. Was it working before?
5. What type of format on the drive, FAT16/32 NTFS?
6. Are all of the drives seen by the RAID controler (Via the controler BIOS)?

After you comment back with this info, I or someone here may be able to help.

by timwalsh

If you are using hardware RAID, you will not see individual drives in Windows. You will only see the drive that the RAID controller shows. At any RAID level, all drives connected to a RAID controller are portrayed as a single drive.

by cg it

To add to Tim's answer, [hardware RAID isn't seen by Windows] the Promise ATA Raid [hardware RAID on the motherboard] has a Fasttrack utility which will allow you to view, recover, replicate, all RAID Drives connected to the RAID channels. Installation of the Fastrack Utility [if using the on motherboard Promise RAID] is a great plus.

This discussion is closed to new replies.