Question Locked

raid1 configure mirroring

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Configuring RAID 1 mirroring
I have an uncertainty about configuring my 2 400GB drives in RAID 1. I currently am using 1 of them for storage and it does not have a backup. I have decided to purchase a 2nd drive and wish to set it up to mirror my current one.

My question is, will I lose the data on my current drive when configuring the RAID setup? I am just using the ASUS utility as the RAID controller is built into the board. So, should I find a way to backup before creating the RAID?

2 replies

by hal 9000

Once this is done with your ASUS Utility you can clone the Image or whatever you make back to the RAID Array and have a mirrored drive setup which will give you a lot more redundancy.

You may need a USB Device to use to store the Cloned data to but this depends on how much you need to store and how you intend to go about it.

Col

This discussion is closed to new replies.