Discussion Locked

Ram PC100 or Pc 133?will it hurt m/b?

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
have a ATC6120 motherboard, which runs pc100 ram, but i have 256 of ram in pc133, can i use it without hurting the ram or motherboard or cpu(300mhz)

3 replies

by thechas

As long it is the correct type of RAM (SDRAM?) it will not cause any damage to the PC or motherboard.

PC 133 SDRAM is backwards compatible and will run just fine when under-clocked at 100 MHz.

Now, there is a potential for a problem.
Newer SDRAM DIMMS do not always function properly on older motherboards.

Many older systems cannot recognize the newest high density RAM structure.

I have seen many a DIMM that would not function on a specific motherboard.

Worst case, the system will not pass the POST with the new DIMM.
More typically, if there is a problem, the system will only recognize 1/2 or 1/4 of the DIMM.

Bottom line, it's safe to try it.
If it does not work, switch back to your old RAM.

Chas

This discussion is closed to new replies.