4 replies
by dmiles
by thechas
SDRAM specifications in particular change over time.
I suspect that the new RAM module uses higher density memory chips than your motherboard supports.
You may need to specifically locate some single or double density RAM.
If you are very lucky, you can get a BIOS update for the motherboard that will allow it to recognize the newer RAM modules.
Keep in mind, that for W98 or Me you don't want to install more than 511MB of RAM.
There is a bug in the core Windows code that can cause some strange problems with more than 511MB of RAM installed.
Chas
by otl
Some motherboards require the largest ram be installed in the first slot, otherwise it will only recognize what is installed in slot 1 as the largest ram.
ie;
slot 1 128M + slot 2 256M = 256M
slot 1 256M + slot 2 128M = 384M
by sab_arturo
If all else fails, update the bios. it sounds like sd-ram, and i've had many boards which won't recognize a full chip without a bios update.
good luck,
Martin
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending