Discussion Locked

RAW partition - Cant access

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have 80gb HD partitioned. I upgraded my system partition from W2K to XP. When the XP install was complete. I am now unable to access one of the partitions. It says is RAW. Is there a way to convert that to FAT32 or NTFS with out lossing the data or is the data already lost?

1 reply

by mrafrohead

Here's a couple ways to handle this.

First, take it the way it is and make an image of the drive as it is. I know, it's broken, but better safe than sorry before you start moving things around.

After that is done, if you can load it into another computer as a slave drive and from there you can see if you can access anything. If you can not. There is a program called R-studio. Get the demo and see if you can pull the data off of the drive. If you can see the data with r-studio then you may have a chance to recover. First before gettig the full version, if you have access to partition magic, use that to convert the drive to the format that it is supposed to be. That should work. If not, then you can get the r-studio software and recover that way. But if for some reason Parition magic messes up the partition and you can no longer recover data with r-studio, then you restore the image that have already made and then do the recovery. You should be fine after that...

Let me know if this helps out.

Mrafrohead

This discussion is closed to new replies.