Discussion Locked

Receiving radio channel over PC speakers

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have been using a pair of external ZoltriXound speakers attached to my Toshiba laptop for the last 4 years. Recently I moved to a different area of the city & am now faintly picking up what sounds like a radio channel, when I turn them on. Toshibaadvises it is not the sound card. I have tried wiring to a separate room & changing the speaker wires & unplugging the remote phone attached to the same power source to no avail.
I am not sure if it is the quality of the speakers, if there is a shortwave or satellite dish nearby that may be affecting the reception.
To date no one has heard of this problem & a search on your database doesn't bring this specific topic up, although it does talk about interference. (I tried the suggestions in that article.)
Any advice is appreciated.

5 replies

by aplus_certifiable

Just as everyone has heard stories about dental work picking up radio signals (true by the way) so can computer speakers. Based on the proximity of the transmitter and the strength of the signal bleed over can be picked up by your speakers and affect your sound quality. Short of moving my only suggestion would be to try some other brand of speaker that hopefully won't be affected by the bleed over as severely. Contact Harmon Cardon, Altec, and some of the other speaker companies and see whatthey advise

by guruofdos

I'd be more concerned about an AM radio station, rather than Microwave, FM, or satellite. It may be a poor connection to the sound card, a dry solder joint or some other random problem. AM transmissions can be 'detected' by any component acting as adiode, in the same manner as the crystal sets of yesteryear. The wiring to the speakers, capacitance of the wiring etc produce what is in effect a 'tuned circuit' which seems to be 'resonating' at the carrier frequency of a radio station. This is not uncommon!! A poor or semi-conducting contact (e.g. oxidisation on the copper terminal of the speaker jack, metal to metal contact of dissimilar metals, oxidisation of a dodgy solder joint) will act as a diode, rectifying the carrier to recover the AM modulation, which is then amplified by the speakers and produces the radio breakthrough. It may even be that metal in the building or mains wiring just happens to be of a wavelength identical to a radio station is 'tuning in' and in turn re-radiating this to your audio system. Try another set of speakers, or carefully clean all contacts if possible. Failing that get a ferrite core and wind two turns of the speaker leads through the core and see if that helps.

This discussion is closed to new replies.