6 replies
by djfrankn Accepted solution
by oh smeg Accepted solution
The Drive [b]Is Not[/b] correctly fitted tot he Enclosure.
Now depending on what type of HDD this is things vary a bit but assuming that it is a IDE Drive of some sort there need to be set to Master Not [b]CS or Cable Select[/b] when fitted to a External Case. Try removing the drive from the case and setting the Jumper on it to Master.
Also depending on what security you had on the XP install you may need to [b]Take Ownership of the Files/Folder/s[/b] by following the directions here.
http://support.microsoft.com/default.aspx?scid=kb;en-us;308421
Col
by djfrankn Accepted solution
by oh smeg Accepted solution
Is the Interface Card between the USB Lead and the HDD.
When you get this type of Error Message it generally means that either it's an IDE Drive not jumpered Correctly or there isn't enough Power to the Drive.
If this has it's own Power Supply you'll need to check the Power Supply for the correct Voltage and Current. If this is a 2.5 Inch HDD type you'll need to plug both of the USB Plugs on the Y Cable into different USB Sockets on the M'Board or into a Powered USB Hub.
The USB plug at the end of the Y Cable is a Power Only Plug while the one in the middle is a Power & Data Plug. The USB Standard supposed that there is 500 Milliamperes at each USB Socket and drives bigger than 80 GIG need more than the 500 Milliamperes available so you need to make sure that the USB Plugs are in different USB Sockets and not connected to a Unpowered Hub that is getting all of the power from just the 1 USB Socket.
Sorry but that's all I can think of here. ;)
Col
by jacobluis Accepted solution
by oh smeg Accepted solution
It works quite well according to several other TR Members but there are just as many other people who will recommend different applications depending on their personal preference.
Personally mine is On Track
http://www.ontrackdatarecovery.com/data-recovery-software/
But there are others and depending on what you need to do there may be better ones to suit your needs. ;)
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending