Discussion Locked

reformat hard drive

0 helpful
13 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have Win2000Pro on my system, I want to install XP Pro. My registry seems to be corrupted and won't let me install XP. My system is only 1yr old (Dell Demsion 8200).

What is the best way to format my hard drive to do a clean install?

13 replies

by handn1_

what do you want to do :???
dual boot or go Xp all the way
E-mail handn1_@hotmail.com

by alveden

The easiest way is to boot windows XP from cdrom. Ensure that the bios setting are enable to boot from cdrom first before the hard disk.

After that, just follow the insturction. Just remember to choose the options that allow you a fresh installation

by opatzg9

go to bootdisk.com and download the disk for xp.
boot up from floppy, fdisk and format your drive to your liking and the pc's capabilities and load xp.

by alpha-male

I have found that unless you have data on your HD that is important to keep, a clean install is undoubtedly the way to go for the best performance and stability. I generally reformat and clean install my systems about once every 6-9 months (with theexception of the Netware server...it just keeps going and going and going).

Boot from the XP CD and then completely reformat your drive and install. Interestingly enough, I'm doing the exact same thing to one of my systems Saturday. Wish me luck....

and good luck to you!

by handn1_

Might take a little work but here you go get a copy of partitions magic this is a nice software
it has a GUI, this program can read and see ntf,fat32,fat16 you can del partition and re partition change fat,format all one needs to do the job.
I have used it to create two partition on my HHd
one for my OS the other for Storage Think about it
partition magic v.5 is the one I have
try this link
http://www.crud.net/pub/pq/
for the files

by cg it

Best way for a CLEAN install is to reformat the hard drive (all logical drives) using a floppy boot disk with format utility. To accomplish this first make sure the BIOS boot order is Floppy, CD Rom the O hard drive. Insert the boot floppy disk and turn on your computer. Once the computer boots and your at the command prompt A:> type format : press enter. At the warning message formating drive will result in all data being lost. Do you want to continue with format, type Y press enter. This will format the drive in FAT. Repeat this procedure for all logical drives. Once the drives has been formated, remove the floppy disk. Insert your O/S CD into the CD Rom. Power down your computer. Now power up your computer. Your O/S install disk will automatically start up to install your O/S on your CLEAN hard drives.

This discussion is closed to new replies.