3 replies
by ghimpe--
Basicly the difference is how you connect it to the computer. The internal one must be installed inside the case in (often) a PCI slot.
The external one is connected to the serial/USB connector at the back of your computer case.
Internal modems can be hardware or software controled. External modem are all hardware controled.
Software controled means that your proccesor is used because the modem lack it's own.
Software modems are also knows as winmodems.
If you need to buy a modem, keep in mind that external modems are more expensive that the internal ones, but there are easyer to install.
If you chose an internal modem, try to buy an hardware controled one, it's a little more expensive than the software ones, but you will have a harder job if you want to use it on another OS than Windows (ie: linux)
GooD LucK! ;)
by dmiles
There is a difference between upgrading internal modems versus external modems When installing an external modem you will NOT need to remove your PC cover. You simply plug in the 25 pin connector into your modem and the other end to serial port at the back of your PC, and then install the drivers. After you reboot, your modem should be functioning.
Internal modems are slightly more complicated to install especially in older pre-1996 PCs because they require unoccupied COM ports which require correct IRQ settings in order to function. An IRQ (Interrupt request line) is basically the way your modem ?asks? to be recognized by the CPU. Very often COM 1 is occupied by the mouse. If you are installing a Plug and Play modem in Windows 95/98/ME/2000 and XP, the system will automatically designate a COM port for you new hardware when you run Modems in the control panel menu. When you purchase your modem check to see what versions of windows it works with some modems will not function with Win 2000 or XP. If you're installing a Winmodem or plug and play modem the later versions of windows will automatically detect the modem once its installed and you can begin using it immediately. Continue reading below for hardware installation instructions if you have not yet installed your modem.
by wlbowers
One connects to a pci or isa slot inside the computer.
The other connects via a serial or usb port outside the computer.
Lee
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending