2 replies
by dmaguire Accepted solution
by hal 9000 Accepted solution
But depending on what was done to it to prevent anything being written to it you could have a problem.
Now is this NB Part of a Managed Domain or a stand alone Computer?
If it's part of a Domain there are quite likely rules set either through Active Directory or Group Policy to prevent software being added to this system [i]That includes Drivers as well as other software programs.[/i] In this case you'll need to take the NB to the IT Department and get then to fix it.
If this is a stand alone computer what did you do to protect your data? It will be something that you did there that is causing the problem now. If you have used EFS I would suggest that you backup all your Data [b]NOW[/b] without any form of Encryption as it's easier to recover that way. If you have used Windows Encrypted File System or have a NB with its own File Encryption Chip built onto the M'Board you'll need to follow the directions to recover the encryption key for Windows it's this way
But if the NB has it's own Encryption Chip you'll need to read up on saving a copy of the Encryption Key that will be in the NB Manual. If you don't save this Key all your data will be rubbish and unreadable.
Don't attempt to do anything till you are sure that you have a solid Backup readable on a different computer and then you can proceed to look at things that you may need to do to get it working properly again. Just a [b]Note of Warning[/b] here if you do an In Place Install of Windows you'll delete the Encryption Key and all your data will be unreadable and there is no cheap way of recovering it so you need to proceed very carefully unless you are unconcerned about your data.
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending