8 replies
by scotmandoo Accepted solution
by p.j.hutchison Accepted solution
There are a few things you need to know:
1. Is it an IDE (ATA) also know as PATA (Parallel ATA) or a SATA (Serial ATA) disk?
2. If its a PATA or IDE disk, you need to set the jumper to Master (see this disk itself for where jumpers go).
3. In the BIOS you need to change the order in which the discs are checked. A good order is:
1 - Removable media (eg. Floppy, USB, Zip)
2 - CD or DVD ROM drives
3 - Hard disk
4 - Any other device
The place and location where this is depends on the manufacturer and version of BIOS. Typically it will be under 'Advanced BIOS Features' or equivalent.
by hal 9000 Accepted solution
As you asked how to change a [b]Small HDD[/b] if this is in an Old Computer you need to remember that the BIOS has an Upper Size Limit for the HDD and you can not exceed this Size and have the HDD work correctly without first using some software to trick the BIOS into thinking that it is addressing a different size HDD.
If you are new to this it's always a better option to go with a HDD equal to or smaller than the Upper Size Supported by BIOS.
You may also initially provided that the replacement HDD isn't formatted not need to change the Boot Order but this depends entirely on what OS you are installing. If it's something like Windows XP you can get away with leaving everything alone as it should be set to Floppy, HDD 0 and then CD/DVD and if there is no partition on the HDD it will default to the CD/DVD Drive to format and copy the files to so you can load the OS like that. However if you are attempting to load Windows 98 you'll need to first FDISK the Drive and then FORMAT it so you'll need the boot Options set to Floppy Cd/DVD then HDD 0.
As this will be on an IDE lead do as the above poster said.
However if by Small you mean a Note Book HDD that's a different matter and you'll again need to know if it's a SATA or IDE drive what the Upper Size Limit Supported by BIOS is and what are the physical charastics of the HDD so you can get one that will work in place of the one that you are removing.. You'll need to look at the physical size and height of the drive as well as the size supported in MEG or GIG.
Col
by scotmandoo Accepted solution
by scotmandoo Accepted solution
by p.j.hutchison Accepted solution
by hal 9000 Accepted solution
If you have a problem with the 60 GIG drive not being recognised by BIOS there is a disk management tool on The Ultimate Boot CD which you can use to trick the BIOS into thinking that it's looking at a smaller drive. You can download th Ultimate Boot CD from here
It's just that 60 GIG is a strange size as they mainly went from 20 to 40 to 80 GIG and while IBM did have some 60 GIG HDD's around they where a rarity and being a Death Star where not something that you really wanted all that much.
But good luck in your endeavours.
Col
by scotmandoo Accepted solution
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending