Discussion Locked

Replacing Printer Heads

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I'm a Printer Engineer I have a problem wuth HP Deskjet 2500cm, it gives the messsage printer head faulty replace black printer head, how do i replace the heads, i thought the heads were part of the cartridge.

2 replies

by bjlumpki

I've run into this problem before and on the 2500 series the print heads and the print cartridges are seperate, because the ink cartridges are not directly over the paper. The ink is sucked from the side where the cartridges are and over to the print heads which are located over the paper. HP sells both cartridges and heads at their site under 'printer supplies and accessories'. It should be fairly easy to replace.

by bjlumpki

HP uses this system so that each ink cartridge can be replaced individually. The ink cartridges are grey, about three inches wide, 1/2 inch thick and have rounded tops with color or black labels. They are under the right front panel of the printer.
The print heads are all black except for their stickers and are square with a little needle off one side. They move back and forth over the paper so you have to get the printer to move them to the middle to replace them. There should be an option to 'replace print heads'.
Let me know if this helps.

This discussion is closed to new replies.