5 replies
You could remove the CMOS battery, but it's NOT RECOMMENDED.
Follow this link. It might have some helpful information.
http://www.pwcrack.com/BIOS/bios.html
Or more password recovery tools can be explored at this link:
http://www.1coolpack.com/6.htm
(If any SPACES appeared in the posted links, be sure to remove them.)
Good luck,
Max
by shanghai sam
by diamond dan
hi pctecks,
Here is the deal: the BIOS password is stored on a EPROM chip. This chip needs a steady supply of DC to keep it's data refreshed, this is the reason for the onboard battery. If the chip loses all DC power, then the data on the chip will be lost. But it is not that simple, as the system board has capacitance. What this means is that even after removing the battery, there is still some DC current stored on the board. The power consumption of the BIOS chip is so little that the onboard capacitance can keep the information intact while you would change batteries (or even while you run to the store to buy a battery to change :) ). To completely deplete the current on the board you can either wait a long time (depending on the components involved it could mean days) after removing the battery, or you can remove the battery and then 'short out' the capacitance to drain the current. In this respect the previous poster is correct, you need to find the jumpers on the system board to do this. They should be near the battery (but they aren't always). It should say something like 'Clear CMOS' or 'CMOS battery'. Keyword again is "should be" (motherboard manufacturers are notorious for not adopting set documentation standards).If you find the jumpers, move the plastic pin connector so that it joins the two pins(that were previously not connected). This will drain the current and reset the BIOS chip. Move the jumper back and replace the battery and restart. You will have to check your BIOS settings, as they will have reverted to the defaults, to ensure that your system is the way you wanted it. Then you will be good to go.
Cheers,
dan
by shanghai sam
by pctecks
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending