Question Locked

restore a laptop back to when it was new

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We had our laptop hard drive trashed and now have purchased a new hard drive. How do I use the disks that came with the laptop to restore all the software back to when it was new?

3 replies

by kaptandrews

gone into the BIOS and change the boot sequence to look to the CD first. If you are using a pre-fab restore CD...it should do the rest. Good Luck.

by hal 9000

On the bottom of the NB before you start the install.

If this is a new unused drive the system should automatically boot from the CD and start the install process but if the HDD has been formatted you'll need to go into BIOS and reset the Boot Order to Optical Drive then HDD and you'll need to push any key to get the Windows Installer to start running.

The rest should be straight forward but you'll need the product Key on the COA so you can enter it in during the install procedure and closing up a NB and turning it upside down isn't a good trick when it's running.

Col

This discussion is closed to new replies.