Discussion Locked

S-Video cable

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
My computer has S-video 4 pin connector..my question is it is possible if i use the S-Video cable with 7 pin.Thank you for helping

1 reply

by d_v ant

Generally the four pins on those 7-pin connectors on the same places as the standard four pin S-video connector have practcly always the same fuctionality as those pins in S-video connector. The other three pins can have then some extra signals which are not part of S-video (usually some pins of those carry composite video and some control signals, but the use of those three extra pins vary quite much). So if you encounter 7 pin connector for S-video, then forget the three center pins... just use the four on the standard positions. The circuit should work with those connectors as well.

Copied from: http://www.hut.fi/Misc/Electronics/circuits/svideo2cvideo.html

Remove any spaces from URL after pasting

It appears that if the cable will physically fit, then it should work.

This discussion is closed to new replies.