Question Locked
0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have recently installed Windows XP Pro on a system that I built. The main (C drive) is Western Digital 74GB SATA drive. I encountered no problems loading and configuring Windows. The problem is that I have recently added an additional Seagate ST3200822AS 200GB SATA drive to the system. My system recognizes the Seagate within Device Manager and says it's working properly, but I cannot access the drive through MY COMPUTER. It's not even listed as one of the drives. How do I acces this drive which Windows obviously is there, but won't allow me to access?
4 replies
by cwilk73 Accepted solution
Clarifications
by hal 9000 Accepted solution
If you haven't as it's not formatted it will not be visible in My Computer as while the Drive is there there is nothing written to it so it can be read so no drive shown and no drive letter.
To format the drive left click on Start, Control Panel, Administrative Tools, Computer Management then Disk Management. Scroll down till you find the 200 GIG Drive and right click on it and chose the Format Option.
When it's formatted you'll see it in My Computer and you'll be able to write to it at will.
Col
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending
Question Locked
Setting up a wifi bridge with switch correctly
0 helpful
5 replies
Question Locked
Experiencing Bottleneck with RTX 4060 + i5-12400F - Need Advice
0 helpful
5 replies
Question Locked
Keyboard
0 helpful
3 replies
Question Locked
Core i7 12700KF or Core i7 12700F ?
0 helpful
9 replies
Question Locked
Looking for honest opinions on gaming PC
0 helpful
5 replies