Question Locked

Sata with IDE Sluggish

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am new to SATA drives and to this forum, I have been impressed with the advice and support so I joined... I have purchased and attached a Maxtor 320 gb SATA drive to an ECS P4M800PRO-M - 2.66mhz Intel Duo, with a Quantum Fireball 30gb drive (in place)and 1gb of Kingston 3200 memory. I've installed XP-Pro SP2, I'm not getting the performance speed/responsiveness) that I expected. Is there a bottleneck with the 30gb drive?

4 replies

by hal 9000

For a bottleneck. Though there could be other factors coming into play like does this M'Board support Dual Channel RAM and if it does do you have the RAM in the correct Slots? Do you have more than 1 stick of RAM as well?

Things like that will slow down the performance of the system and if you have On Board Video it will be that much slower because you are using the CPU and some System RAM to generate the Video Signal.

Col

by heian

The Mobo does have 2 modules of RAM (Kingston), I'm not sure about the Dual Channel...However, it does come with the Onboard Video port that draws it's 64mb of memory from the extended. At this time, I have that disabled (thru bios) and I am using the AGP port with a 256 NVIDIA card.

Thanks Again

by heian

I was out of town, so I'm just getting a chance to tackle my office issues. I removed the ATA drive and everything seems to be coming up roses! Thanks for the advice.

This discussion is closed to new replies.