Discussion Locked

Saving info to floppy

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

cannot save info to floppy disk.computer says it is write protected. I have moved the write protection slot on the disk open and closed still get the same result. I have also installed a new
Floppy drive and purchased new IBM 1.5 formatted
disks.It reads any disk ok. but cannot delete material or formatt or save anything to disk.

3 replies

by thechas

Check your BIOS settings for the floppy write protect switch set to enable.

When floppy write protect is enabled in BIOS settings, your floppy drive always works as if the write protect tab is set to protect.

Chas

by skloo77

can i suggest to boot up with a bootable floppy and then try to read and write in the DOS mode..
at least to verify that the hardware for your floppy is still working.

by gmoyer3292

cannot find floppy write protect enable, or disable in my bios. Windows xp prof. more info
please,

This discussion is closed to new replies.