Discussion Locked

screen blank

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am using windows98,motherboard is 810chipset celeron 400mhz,64mb RAMand 20GB harddisk.It is working fine inwindows mode but when i watching movie on my system the system oftenly problem .. mean my monitor status show screen blank and monitor powershow red or orange.. then I can not any thing doing some thing on my machine.. therefore i open my system and replug the cable of vga on board then system working..
any one help me .......about that
Note: sound card ,vga and modem are builtin on board ..
thanks Nawaid

8 replies

by vramji

This problem may be occured by three reasons

1 Problem VGA Card.
2. Problem in your VRAM
3. Windows driver

So, change your board and test it.

by albert franco ii

Check the drivers for the board. Hardware is so much faster to market than software that most video boards (on the motherboard or not) are shipped with buggy drivers.

Go to the vender site for the video chipset or motherboard maker for your system and download the latest drivers.

Also check that the video codecs you are using are correctly installed.

by albert franco ii

You could also try disabling the on-board video and installing a PCI or AGP card. This should allow you to rule out the on-board video as a problem.

by jdkline

Check your Power Management schema in the Control Panel. If you have no activity (no new keyboard or mouse stimulii) on your computer, Win98 will blank the screen by stopping the signal to the monitor. New monitors will automatically "sleep" when this occurs. Older monitors will flash the power led to indicate loss of signal.
Check to see if your system is going to "sleep", this may also be your other posting problem.

This discussion is closed to new replies.