Discussion Locked

SCSI???????????

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Help I need a SCSI pro..........

I have a client that has a SCSI controler going to a seagate HDD. I built the system out a few years ago and everything was fine. I got a call a few weeks ago saying the system was dead. Well after finding whathappened. The user was loading HP printer software and some how nuked the system. I have no idea how it happened but now the system will not boot. During the boot process it waits and waits at chaA di0 and then says found seagate, and that the drive is connected but not ready??? I am by no means a SCSI pro. I've tried booting with a boot disk but it say the disk is not configed correctly. I'm sure I have the ARC wrong. Durning boot it says the SCSI bios is not loaded. I've also tried reloading NT but it fails tring to find a disk to load onto. The disk light flashed so I know I've got connectivity but that's it. I guess the question is what is the methodical steps in trying to recover a SCSI disk? Are there any utilitys out there that can help me find out what the problem is. Any help is going to be great. Thanks

5 replies

by bwklatt

I'd suggest removing the suspect SCSI hard drive and take it to another system with a compatible SCSI controller. Set the suspect SCSI HD ID so it doesn't conflict with the other known working devices and add it to the SCSI chain. Boot the system and try to access the suspect HD. This will help you determine if the problem is with the HD or controller & cable. If the drive is readable you could try to boot from it in the test system. If it boots OK, the controller or cable in the client system is most likely the problem. If the drive won't work right on the test system you could send it to one of the many data recovery places.

by pmarsh

Unfortunatly I don't have another SCSI system to test it with. Are there any adapters to convert a SCSI HDD to and IDE that way I can test it on a known good system????

by a.c

Has the SCSI BIOS got any built in test utilities ?, a number of SCSI cards when they load the BIOS allow you to get into utilities by way of a function key or similar. These usually cover low level tests + format etc.

This discussion is closed to new replies.