Discussion Locked

SCSI Boot-up Problem

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a problem with an Intel based server which has a SCSI interface on-board as well as a SCSI Interface card. The harddisks are on-board and there is a Jazz drive on the card. The problem is that I have to shut the server down before the SCSI ROM picks up the harddisks (bootdisk), resulting in the server not finding a bootable drive when you restart the server, you have to shut it down and turn it off before it will boot. Is it a problem with terminators maybe?

Thank you.

5 replies

by daa-automotive

You need to make sure that the SCSI controller that you have your HDDs on is the primary controller otherwise the thing will not boot from your HDDs. Make the rest of the SCSI controllers in there secondary and it should fire right up.

by mckaytech

You might want to also make sure that there is no IRQ conflict between the on-board controller and the additional controller card.

This discussion is closed to new replies.