Discussion Locked

SCSI Harddrive problem in Windows 2000

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I installed an old Adaptec 2940 UW SCSI Controller in a test server running WIndows 2000 Advanced Server with 3 devices. A CD-Rom and 2 harddrives. The CD is on the 8 bit channel and the HD's on the 16. All drives are found and accessable through the SCSI BIOS Utility, however in Win2K only the CD-Rom is present. Any Suggestions?

2 replies

by 1stladytech

I am assuming that you have added these drives to the server. Go into Administrative Tools, choose Disk Manager, and set the partitions and format the drives. Win2K won't see the drives until the signatures are written to them in the Disk Manager. Good Luck

Vickie

by cmcdonald1

I forgot to add.... Win 2000 Disk manager does not see the harddrives... It shows the CD-Rom that is SCSI, but the two harddrives are not listed in the physical disk window...

This discussion is closed to new replies.