Discussion Locked

scsi/ide hard drives

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Can you have an ide and scsi hard drive on the same PC? I'd like to connect a scsi drive onto a machine with an IDE drive in order to search for some missing files...the scsi drive is unbootable and I don't want to risk overwriting the data. Currently all the other machines have ide drives. Thanks!

7 replies

by raffi_

You can but there are a couple of things you need first.

The machine it is going in to must have a SCSI interface. This can either be on the motherboard or an interface card installed on the bus.

If there is an interface card in the old machine you may be able to use that one. Be careful tho' - if you have no experience messing around inside a computer you can do some damage. And if it is an older interface you may need some drivers for it. Make sure you can get those BEFORE you do anything else.

Regards
Raffi_

by aplus_certifiable

With an IDE drive and ATAPI you can have upto four IDE drives linked on IRQ14. With a SCSI drive you will need a SCSI interface card installed, and I reccommend on IRQ15 for secondary drives, also rememember to terminate with a resistor on the cable after the last device. You can put upto 7 devices on the SCSI card.

by freetech

i have a scsi card on a machine with an ide drive. if the scsi drive is not bootable then windows will just boot to your present bootable drive without a second of hesitation. your data is safe.
obviously, the scsi drive will not hook onto your ide cable, so you will need a scsi card.
hope this re-assures you.

This discussion is closed to new replies.