Discussion Locked

SCSI & IDE Together

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have an NT server with a 4 gig SCSI harddrive, Someone previously added an IDE 20 gig drive and it was working ok until I moved the IDE drive out of the system and replaced it. Since then it refuses to boot from the SCSI where the OS is and wants to boot from the IDE. I keep getting "missing Operating system" messages.
Is there a fix for this problem which will allow the scsi and ide drives to live together?

5 replies

by ceo_race

You need to reset the SCSI bios to boot from your SCSI disk. You didn't give any details about what type of system your using so, I am not able to help further.

by mckaytech

SCSI and IDE will play together nicely but you have to set up your boot.ini correctly to point to the SCSI drive as the boot partition. It sounds like your BOOT.INI might have resided on the IDE but then pointed to the SCSI drive. You'll also needto check your BIOS setting because depending on your motherboard, there may be an boot device option you need to set.

The best resource I can point you to is an article on Microsoft's TechNet site (Q102873) that describes the syntax used in the BOOT.INI file.

paul

This discussion is closed to new replies.