Discussion Locked

SCSI RPM

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

When is it okay to stay with 10,000 RPM drives?
When is it necessary to use 15,000 RPM drives?

1 reply

by djent

The speed only affects access time. If you setup a data base server the faster drive would improve performance somewhat. On the other hand if you have a file server holding mostly Autocad files you would not see much change due to infrequent access.It all depends on the kind of use. Just don't mix interfaces ie: UW2 with U160 because the UW2 drive will pull the bus speed down to 80 mbps. Adaptec and Seagate both have good white papers on LVD SCSI.

This discussion is closed to new replies.