Question Locked

scsi start-up failure

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

when starting up PC the scsi card does not recognize the floppy drive. using a 486/66hz PC. only thing that works with this GE drives and HMI system from the 70's.
dip switches are set correctly, scsi card configuration is same as some other PCs operating in the field.
changed scsi card, floppys and cables also.

2 replies

by oh smeg

While the card may be set the same way what about the attached drives?

You could have an SCSI Address Conflict occurring here?

Col

This discussion is closed to new replies.