Discussion Locked

??Scuzzy to USB or PCI Adaptors

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a HP 5P Scanner and need to connect it to my new pentium III which doesn't accept the scanner's scuzzy card. Is there a way to hook the scanner through the USB port?? I understand that there are PCI to Scuzzy adaptors, but this would likelymake the scanner run very slowly. Any suggestions?

7 replies

by computechie

As far as I know, there are no USB to SCSI adapters, but I could be wrong. If your scanner has a SCSI port, then I'd recommend using it, because SCSI is much faster than USB. If you cant find a USB to SCSI adapter, then go buy a Adaptec PCI SCSI controller, they won't make your scanner run slower, there the fastest connection to devices thats available right now. SCSI can go up to 160 MBytes per second verses USB's 1.5MBytes per second).

by allan

There are indeed USB to SCSI adapters have a look at www.microtechint.com. I have one that I use to connect my HP scanner to a laptop from time to time. Speedwise with a scanner you can't really tell much difference between USB attached and SCSI/PCIcard attached. It's scanner that's a slow device, USB is fast enough to manage scanning although if you have an auto document feed and you are scanning large numbers of documents you will probably notice a performance degradation.
Go for the XpressSCSI from Microtech it works with Win 95,98,98SE, ME, and Win2k with no problems.

by marence

Adaptec makes a product called USB Connect2000 that is SCSI to USB. Just make sure you have the scanner terminated!

This discussion is closed to new replies.