Discussion Locked

SE440BX-2 MB

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I HAVE TRIED SEVERAL TIMES TO GET THE BIOS ON THIS INTEL BOARD TO SAVE THE INFO AND CONTINUE THE BOOT PROCESS. I HAVE BEEN DILIGENT IN THE JUMPER MOVEMENT AND MAKING SURE TO UNPLUGG THE POWER BEFORE MOVING THE JUMPER BACK TO THE STANDARD POSITION. AFTER SEVERAL ATTEMPTS ALL THE BOARD WILL DO IS STOP AT A FLASHING CURSOR. I HAVE ENEV RESTORED THE BIOS FROM THE INTEL SITE AND STILL JUST A FLASHING CURSOR. ADDITIONALLY IT WILL NOT SHOW ANY VIDEO UNLESS I USE AN ISA CARD(PCI OR AGP SHOW NOTHING) . ANY IDEAS?

6 replies

by daz'n'ash

To better assist with your problem, would you mind telling us what model motherboard you have and what other hardware is attached (HDD, FDD, SCSI, CD Rom, RAM other PCI cards and ISA cards) Once we know this, might help us to help you quicker and more efficiently. Thank you.

by yacco

If the bios won't save your changes, check the mobo battery. Do you get any checksum error messages at boot?

This discussion is closed to new replies.