Discussion Locked

seagate U series 5 ata 100 30gb hdd

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i have tried this on a system and it sees the hdd as a one gb harddrive, i then try to fdisk the hdd and it freezes up about 3 secs. into the process
how do i fix this problem if i can?

6 replies

by reeree

there is a firmware upgrade code for the U series 5 hard drives,,, go to
www.seagate.com/support/disc/utils/
u5_seaflash_eula.html
it will give the model numbers of the hard drives it should work with. If that is no help I would suggest you download their Seatools Disc Diagnostics

by montea7

If the IDE controller you are using is not an ATA-100 controller you may need to use Seagates tools to manually set the hard drive to ATA-66.

This discussion is closed to new replies.