Discussion Locked
0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have installed a second 40G hard disk in my HP Pavilion 4509, running Windows 98. When I go into Fdisk, to set up the primary partition on the new drive, the program comes back and says that only 80% is available. I have read some of the other questions relating to this issue (eg I can only use 7G of my 40G drive etc). Do I have the same motherboard or BIOS problem?
5 replies
by djent
There is FAT32 partition size limit of 32 GB, make 2 partitions.
by info
The question was auto-closed by TechRepublic
by dmiles
To determine the Bios version check the post screen during startup,press the pause key,in the upper right-hand corner you will see the bios version and manufacturer,go to manufacturers web site and check for the latest update,the bootom of screen inleft corner will yielsd the motherboard part no.
The most likely cause for this would be the bios so you will need to check the bios and motherboard manufacturer for a flash update
by info
The question was auto-closed by TechRepublic
by info
This question was auto closed due to inactivity
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending
Question Locked
Setting up a wifi bridge with switch correctly
0 helpful
5 replies
Question Locked
Experiencing Bottleneck with RTX 4060 + i5-12400F - Need Advice
0 helpful
5 replies
Question Locked
Keyboard
0 helpful
3 replies
Question Locked
Core i7 12700KF or Core i7 12700F ?
0 helpful
9 replies
Question Locked
Looking for honest opinions on gaming PC
0 helpful
5 replies