Discussion Locked

serial to usb cable?

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a friend with an older computer who would like to add usb ports to it via his serial port.Is this possible, and if so would it require a usb hub?
Thanx JS

1 reply

by thechas

It would likely cost less to add a plug-in PCI buss USB controller card.
I have seen USB 2.0 cards for under $15.

One problem with a serial port connected USB port would be that it could not run anywhere near the speed of the USB buss.

Another issue to consider, is what version of Windows does your friend have.

Windows NT does not have support for USB ports unless you spend around $100 for a 3rd party solution.

Windows 95 has LIMITED USB support.
If you have version "B", you can 'usually' install the W95 USB supplement, and it will work.

If you have Windows 95 "C", then you have USB support.

If it is an older version of Windows, you do NOT have USB support.

Chas

This discussion is closed to new replies.