Discussion Locked
0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have an old computer (made in 1995). The motherboard is not USB-ready. Is there a device that can convert the serial port (male) to a USB port?
7 replies
by jaolson40
I'v eseen them in some of the larger computer superstores, but they were more expensive than the PCI cards that you can buy that add USB ports to the computer. If you are runnign Windows 95 OSR2 then these cards should work OK...assuming there's a free PCI slot, of course... :)
by lcurran
Poster rated this answer
by giovi
Yes, there is such device. But there some things you need to consider to consider. OS compatibility, speed of USB device would be of serial speed.
by lcurran
Poster rated this answer
by mpixler
I agree the best solution is to add usb to your computer by installing a usb card.
However you need to be running at least Windows 98. You would be hard pressed to find usb drivers for Windows 95 osr2 for most devises because most companies do notprovide drives for Windows 95 osr2. It may also be the case that you need to be running Windows 98 to use a serial to usb converter.
by lcurran
Poster rated this answer
by lcurran
This question was closed by the author
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending
Question Locked
Setting up a wifi bridge with switch correctly
0 helpful
5 replies
Question Locked
Experiencing Bottleneck with RTX 4060 + i5-12400F - Need Advice
0 helpful
5 replies
Question Locked
Keyboard
0 helpful
3 replies
Question Locked
Core i7 12700KF or Core i7 12700F ?
0 helpful
9 replies
Question Locked
Looking for honest opinions on gaming PC
0 helpful
5 replies