Discussion Locked
0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I am trying to setup a visioneer 3100 scanner on a Win98 system. I run the setup file I found from the manufactures site but when I try to add the scanner it does not recognize the scanner. How do I get the scanner to work?
7 replies
by jlouis45
Well check you cabling. Do you have a printer ? if so have you connected the scanner cable to the printer and so on...? if this is ok then try doing the installation again. It should work. Most of the scanners have 2 ports one from the CPU to thescanner and the other printer to scanner. Cos the scanner uses the printer port for scanning.
Hope it works. If not please let me know the result.
all the best
by lilsumo
The printer and scanner were originally setup from the computer - scanner - printer and the printer worked but the scanner still did not work. Then I connected them to a switch box and the scanner still does not work. It just does not recognize the scanner.
by jlouis45
Please check the cabeling I still find the fault in your cable. Ok tell me does your scanner have two printer cable ports or one. See most of the computers have one port so the scanner is connected the printer port and used through that. Check that one and see if things are fine.
by lilsumo
The question was auto-closed by TechRepublic
by goodtruck
Visioneer made two 3100 scanners one is usb and one it printer port. If it is usb I would update your 98 to second addation and see if that helps. You can get the update on Microsofts web page free. Also I would try removeing the usb from the devicemanager and reboot. One the other hand if it is printer port I would check the bios to make sure it is epp. Feel free to email my account for futher info. In the subject put 3100 scanner.
by lilsumo
The question was auto-closed by TechRepublic
by lilsumo
This question was auto closed due to inactivity
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending
Question Locked
Setting up a wifi bridge with switch correctly
0 helpful
5 replies
Question Locked
Experiencing Bottleneck with RTX 4060 + i5-12400F - Need Advice
0 helpful
5 replies
Question Locked
Keyboard
0 helpful
3 replies
Question Locked
Core i7 12700KF or Core i7 12700F ?
0 helpful
9 replies
Question Locked
Looking for honest opinions on gaming PC
0 helpful
5 replies