Discussion Locked

Setup LinkSys BEFSR11 for pcAnywhere 10

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Scenerio:
LinkSys BEFSR11 router on DSL. No static IP address from the ISP. Internal LAN IP's are private (NO DHCP) 192.1.x.x I want to to be able to utilize pcAnywhere on an outside PC also running DSL. I need the instructions on how to setup the LinkSys router to forward the ports (with port numbers) so I can come in as a remote or a host.

Thanks

7 replies

by steved

Here's a partial answer. I can't help you with the router configuration, but I can give you the port numbers for pcAnywhere: 5631 and 5632.

by ann777

On your router in the filters section, setup 5631 to 5631 for TCP for the ip address that is waiting as host. Also setup 5632 to 5632 as UDP for the same ip address. If you are using an older version of PC Anywhere, you will need to setup different ports. 5631 & 5632 works for PC Anywhere 7.52 and above. See the below URL for more info:

http://service1.symantec.com/SUPPORT/pca.nsf/fa9d717749cd872d852566340045d113/8ecb3a8aa231167dc1256915002c5eb2?OpenDocument

Please remove any spacesembedded into the above link.

by mja

Do you mean 1)5631 to 5632? and 2)Is it IP forwarding not filter because according to the router, filters enable you to prevent certain PCs on your network from accessing your Internet connection and port forwarding can be used to set up public services on your network,When users from the Internet make certain requests on your network.

by ann777

Yes, i mean forwarding. I was not at my home when I answered (which is where my linksys router is) originally.

You don't need to do 5631 - 5632. If you do it that way you'd be opening both ports for TCP and UDP. It's probably okay to do so, but you open up two other ports that are not needed (ie. the extra range will be ignored).

Safest way is to open 5631 to 5631 for TCP only (since linksys provides for a range, the same number works in both), and open another forward for 5632 to 5632 for UDP only.

Rejecting all answers means that you earn a reputation and people (like me) who gave you mostly correct information, get frustrated and end up not responding at all.

by mja

I wanted to ask you those questions but it would not allow me to not rate it and just ask the questions. I gave you the points and I thank you so much for the info.

This discussion is closed to new replies.