Discussion Locked
0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I bought a used Compaq Deskpro EN series from a company shutting down. Someone had set a password for the setup. How can I get rid of this password? I have no way of contacting the previous owners....Help?
7 replies
by syscokid
Do you mean the CMOS setup? If so, there may be a jumper on the motherboard near the CMOS chip; pulling it will restore the default values and remove password. So will pulling the CMOS battery.
by smckeen70
Poster rated this answer
by d_v ant
AsyscoKid is correct. There is a jumper on the system board to disable the passwords. Look on the inside of the case cover and there will be a diagram showing the jumpers names, locations, and settings. Just change the appropiate jumper. If you are still not sure after reviewing the diagram, call Compaq's technical support at 1-800-652-6672 and they will help you.
by smckeen70
Poster rated this answer
by mr_sriram
its right that you will find a jumper to clear the password. but ensure whether you are doing with the right one and not meddling with other jumpers.
better check with the motherboard manual before doing with jumpers.
my advice would be, remove the cmos battery (lithium battery) and switch on the system till the RAM Check Completes. now put the battery in its position and switch on the system.
This process will clear the setup(CMOS)password.
by smckeen70
Poster rated this answer
by smckeen70
This question was closed by the author
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending
Question Locked
Setting up a wifi bridge with switch correctly
0 helpful
5 replies
Question Locked
Experiencing Bottleneck with RTX 4060 + i5-12400F - Need Advice
0 helpful
5 replies
Question Locked
Keyboard
0 helpful
3 replies
Question Locked
Core i7 12700KF or Core i7 12700F ?
0 helpful
9 replies
Question Locked
Looking for honest opinions on gaming PC
0 helpful
5 replies