8 replies
by shmaltz
Go to start run and run 'msconfig' uncheck anything you KNOW you dont need, or make sure every device connected to your computer works fine.
Also make sure that there is no CD in the CD drive when you start your computer.
by shmaltz
After re-reviewing the question:
Since you say you did not change any settings, did any1 else change anything?
If you know for sure that not then msconfig will most likly fail to solve the problem.
by jaypee
by tbradley
four things I have found that "suddenly" change boot time are
1. Virus scanner that has been configured for an "aggressive" scan, especially, check all files at startup.
2. A damanged or corrupt registry. Try running scanreg /fix in msdos mode.
3. Someone loaded a bagfull of fonts.
4. A piece of hardware failing or has failed.
Hit the esc key when windows is loading to keep the windows logo from appearing ( 95/98 ) and look to see if anything unusual is happening. If your system pauses an extremely long time while checking installed drives, or
seems to pause an inordinate amount of time at "updating DMI" or "ESCD", it's indicative that you either have a hardware problem, or a pending problem. Disconnecting all drives except your primary Hard drive will either prove or disprove this.
by jaypee
by dai_ca_den
by jaypee
by jaypee
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending