Discussion Locked

socket vs. chipset

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
what are the difference between socket and chipset?which are better??

7 replies

by dcosgrove

Socket is the term for the chip holder on a motherboard ie socket 7 or socket 370. Chip set is the term for the built in chips on the board that support the processor. I believe you are trying to determine the difference between sockets and slots. Socket style chips are flat and have pins on the bottom, they slip into a zif socket and are locked in place with a lever. Slots are for single edged processors that look a bit like a big ram chip. They push into place similarly. My advice is togo with the socket type. Many of the slot 1 and a chips I have dealt with recently develope contact trouble. They become hyper sensitive to impact and movement (a rough cd tray was actually causing one to lock up each time the door closed). If you do go with a slot, blow out the slot before inserting the chip and clean the contacts of the chip with a residue free cleaner.

by shanghai sam

First off, socket and chipset are in totally different categories. A socket type for example is SocketA, Socket7, Socket370 which are chips that lay flat on the motherboard. Another type would be Slot1 or SlotA which a chips that slide in the motherboard at a 90 degree angle. The key to a good CPU is its bus speed, without bus speed, everything will be slower.
The chipset speaks to the PCI bus at exactly HALF the speed/frequency/tact, so that the CPU talks to all PCI devices through the chipset with HALF the external tact or bus speed. A chipset is integrated on the motherboard so don't think you can get away with a cheap one because your expensive cpu will not perform at its maximum. Also, when looking at CPU bus speeds, remember the terms L1 and L2 cache and that you get at least 256 kb, if not 512kb or 2Mb which is what I currently operate with. Hopefully this answers some of your questions.

by cyberjm

First off, socket and chipset are in totally different categories. A socket type for example is SocketA, Socket7, Socket370 which are chips that lay flat on the motherboard. Another type would be Slot1 or SlotA which a chips that slide in the motherboard at a 90 degree angle. The key to a good CPU is its bus speed, without bus speed, everything will be slower.
The chipset speaks to the PCI bus at exactly HALF the speed/frequency/tact, so that the CPU talks to all PCI devices through the chipset with HALF the external tact or bus speed. A chipset is integrated on the motherboard so don't think you can get away with a cheap one because your expensive cpu will not perform at its maximum. Also, when looking at CPU bus speeds, remember the terms L1 and L2 cache and that you get at least 256 kb, if not 512kb or 2Mb which is what I currently operate with. Hopefully this answers some of your questions.

Who is transient and why did he steal my answer?

This discussion is closed to new replies.