Discussion Locked

Sonicwall VPN Client & Linksys Wireless

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have installed VPN Client 8.0 on a windows Xp Pro laptop with a wireless Linksys PC Card. Model # WPC11 Ver 3.0. that connects to a BEFW11S4 Linksys wireless access point. I am attempting to connect the VPN to a SOHO3.

I am having trouble establishing a VPN tunnel to the SOHO3 when using the wireless card. There is no reponse from the SOHO3.

If I use a cat 5 cable in the ethernet port of the laptop the tunnel is established properly. I had assumed there was a problem with the wireless card, but i am having no trouble browsing the internet.

Please help!!!!!!

7 replies

by steve cody

In the Linksys routers I've seen, you need to enable PPTP passthrough, or IPSEC passthrough depending on the VPN you are using.

Check your settings in the web interface, and upgrade your Linksys firmware if necessary. You most likely have a setting to permit passthrough of the appropriate VPN traffic that you need to enable.

Good luck,
Steve Cody

by rcom

The wirless system may be dropping packets or having an issue with speed. Has the wireless connection worked in any other way?

by jf555

HI, I tried that combo too, it did not work, odddly enough, the Linksys NIC was the culprit, once i changed it too a 3Com NIC and configured it properly, everything worked.

This discussion is closed to new replies.