Ranging from a dead CPU to a shot M'Board or anything in between.
About all you can do from this point is to make sure that the Power Really is on and getting where it should be then if you get nothing there become what we used to call [b]A Valve Jockey[/b] start replacing things because they are there and can be replaced.
I doubt that it's the RAM as if it was faulty the Screen should still POST and then give a Beep Error Code of no or faulty RAM. With a Dead CPU you will not see anything work and the same applies to a dead M'Board if one or both have died the system will not POST.
As i can not find a Service Manual for this model it's possible that you may have something as simple as a blown fuse but if the fans are starting I would tend to rule this out.
It's also possible that the mains adaptor is faulty and no longer delivering the necessary power so the battery has gone almost completely flat and can no longer start the unit up.
Col