Discussion Locked

Sound Card Features

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I would like to purchase a sound card to copy songs from vinyl albums to cd's. I run Win 2000 Pro. I do not play games on my pc.

I THINK I need:
1) stereo line inputs
2) software to mark the end of each song where I decide
3) software to filter noise ( e.g. scratches & hiss )

What are the technical features I need for the above ???
Since I'm buying a new card, what else should I look for ???

Thanks, John

10 replies

by tjc

I suggest you get a soundblaster live 5.1 sound series, also get Nero 5.5 for music editing and cd burning. There are most likely better/more expensive equipment but that is what I use. Note I haven't done Vinyl but getting close to it since I can'tfind some of my old stuff on CD, I have Roger Daltry that they haven't put on Cd yet, so post back please how well it went and what you actually used.

Also just a note this is my 500th answer to these message boards! WhaHoo!

by john.verchota

Thank you. That helped a little. But I'm waiting for a little more detail on the features I should look for.

by ann777

Be careful with this. I have 6 computers at home, and the only way I could get everything to work and accomplish this was by persistance.

1) I purchased Nero 5.0 (which does upgrade to 5.5)
2) I purchased Pyro (Cakewalk's software for editing MP3, and recording, etc.)

My computers are:
Intel PII 550MHz - Win98SE
Intel PIV 2 GHz - Win2000 Pro
Intel PII 400MHz - WinNT
AMD K6 350 MHz - Win98SE
Intel P 150MHz - Win98SE

The only sound card that would work with my old record playerwas the Pentium 150 -- the oldest computer in the lot. The other computers would not work with the Sound Cards.

Please understand that the P150 has a Sound Blaster Pro, the other computers have Creative's Sound Blaster Live Value and SB with 16 bit emulation.

Cakewalk's Pryo worked with all the computers, but there was no sound on anything except the Pentium computer. I ended up doing the recording on the Pentium --> and transferring the results to other computers to do the editing andfinal copying to CDR.
----------
I suspect that part of the problem was a resource allocation issue... but since I got everything done satisfactory, I did not pursue it.

But I recommend that you not "overload" your computer with other deviceswhen doing the recording. For instance, my other computers have CD ROM drives (the pentium does not), they all have nics, but the computers that wouldn't record also have CD-ROM, CD-RW, and Scanner, Camera hardware installed.

Basically, I'm saying, if you have a lot of hardware devices, disable some of them before trying the whole route here. I think you should be fine with any Sound Blaster card and any of the software out there to accomplish this task. It's just a matter of getting all the hardware to behave properly when resources are scarce.

by ann777

When I say that the other computers would not work with the sound cards, I meant to say, the sound cards DO work, they just would go through the motions of recording, but everything was blank -- no sound. Yet the sound on the computers when doingstuff, works normally.

The sixth computer was a laptop, Pii 266 MHz that really did not get involved in the above process. (nor, now that i think about it, did I involve the win2000 computer).

The WinNT was not involved either, except that it is Server and I used the server to transfer files to the other computers with more hdd space.

That's another thing you need to consider --- HARD DISK DRIVE SPACE.

by ann777

Just one more note:

All of my computers have a minimum of 128 MB of RAM... the Pentium 150 that I used for sound recording has 192 MB of RAM.

by john.verchota

Thank you. That also helped a little, but it looks you included some detail that does not help me find features I need.

by thechas

Check out this web site.
http://www.enhancedaudio.com/

They sell a record to CD software package, are dedicated to making quality CDs on your PC from analog sources.
There are links to sites selling audio grade A to d cards.
And, an FAQ as to why you don't want to use a "standard" sound card.

If the quality of the recorded sound is what is most important to you, you need a better quality A to D converter than is on any "standard" pc sound cards.

What you realy want is a low noise, high speed data aquisition card to convert the audio signal to digital data.

by thechas

The quality of the analog front end, and the A to d converter is part of why home stereo CD recorders cost as much as a cheap PC.

by john.verchota

And also Thank you. While this does not contain the detail I had hoped for, I expect it will quickly lead me to the detail I need. Very good response.

This discussion is closed to new replies.